What are the specific operating steps of the stone cutting machine?

The specific operating steps of the stone cutting machine usually include the following key steps to ensure the safe and effective completion of the cutting task:

1. Preliminary preparation

Safety inspection: Before using the stone cutting machine, ensure that the operator has understood and fully mastered the use of the equipment and safety specifications. Check whether the cutting blade and roller are free of damage or wear, ensure that the base is stable and firm, the circuit and electrical equipment are normal, and the water system is smooth.

Personal protection: Operators should wear electric shock resistant gloves, work shoes and other personal protective equipment, do not wear gloves, loose clothing, long hair and other dangerous items to operate.

Second, start the machine

Turn on the power: turn on the power of the stone cutting machine and check whether the power indicator light is on normally.

Start the machine: press the start button to start the stone cutting machine. Wait for the cutting blade to accelerate to the normal speed, and make the necessary adjustments to ensure that the blade runs smoothly.

What are the specific operating steps of the stone cutting machine?

Third, stone placement and positioning

Stone placement: Place the stone that needs to be cut smoothly on the workbench of the cutting machine to ensure that the stone is fixed firmly to prevent moving or shaking during the cutting process.

Adjust positioning: According to the cutting requirements, adjust the position and Angle of the stone to ensure that the cutting line is accurate.

4. Start cutting

Start cutting: Hand operated lever, control the blade to cut. During the cutting process, keep the hand stable and push the cutting machine at a constant speed to avoid the reduction of cutting quality caused by too fast or too slow.

Observe the cutting situation: In the cutting process, pay attention to observe the quality of the cutting surface and the operation of the blade, if there is an anomaly should be stopped in time for inspection.

5. End cutting

Turn off the machine: After the cutting is completed, close the stone cutting machine in time to stop the rotation of the blade.

Clean up the site: clean up the cutting site, remove the waste and debris generated by cutting, and keep the work area clean.

Through the above steps, you can ensure the safety and cutting effect of the stone cutting machine in the operation process. At the same time, regular maintenance and maintenance of the cutting machine can extend its service life and improve its work efficiency.