What are the common problems of ceramic tile cutting machine machinery? How to deal with common problems?

Ceramic tile machinery is indispensable machinery for ceramic tile processing, and ceramic tile processing machinery after a long period of operation, it is easy to appear some common problems, and friends in the ceramic tile processing industry need to understand what are the common problems of ceramic tile processing machinery and how to deal with common problems. In this way, when the ceramic tile machinery has a fault, it can be solved more efficiently.

Fourteen grinding head arc polishing machine

1, the press wheel of ceramic tile machinery press uneven solution on the surface of ceramic tile: the pressure of the press wheel is not uniform, and there is a gap between the press wheel and the surface of the ceramic tile, should check whether the press wheel is damaged, and then readjust the press wheel and the surface of the ceramic tile.

2, the mechanical conveyor belt deviation solution: the drive shaft conveying deviation, drive shaft conveyor belt with two correction wheels. If the conveyor belt runs off to the side of the electrical control cabinet, loosen the fixing nut near the control cabinet, move the adjusting roller upwards, and then tighten the screw. If you run to the other side, move the other side of the roller up.

3, the mechanical phenomenon of empty processing solution: the speed of the inverter motor should not be too fast, too fast is also easy to cause the belt speed and the speed of tile processing is inconsistent, resulting in processing neglect, the motor appears idling without tile through, or the tile runs too fast without complete processing. The speed of the inverter motor should be properly adjusted, and the data given by the manufacturer should be used as the standard for debugging.

4, the mechanical motor connected or stopped moving or wrong moving solution: should check the electrical line, electrical adjustment parameters are appropriate, the electrical indirect head is loose. If the battery brake is working, check that the proximity switch is working.

5, the mechanical processing of the product error solution: the surface of the conveyor belt with a lack of edge phenomenon, debugging the vertical line of the conveyor belt to maintain parallel, to ensure that the width of the conveyor belt is consistent, so as to ensure that there is no lack of edge.