Multifunctional tile cutting machine operation safety manual

1, before use, check the power line, switch, saw blade, saw blade fixing screws, protective cover and other unsafe factors. There should be adequate lighting for night work.

2. Wear work clothes and protective goggles.

3, open the main switch, no load test turn a few times, check the direction of the sawtooth, to confirm the safety before allowed to start.

4, do not wear gloves operation. If dust will be caused during operation, wear a mask or mask.

5, when sawing the material, be sure to fix the material firmly, and do not try to cut small objects that are not clamped.

6. This cutting machine is only allowed to cut ceramic tiles after replacing the saw blade. Do not cut other items. If you want to cut other materials, replace the corresponding saw blade.

7, do not carry out strong cutting saw operation, before cutting to make the motor reach full speed. Do not place the power cord in front of the object to be cut to prevent the power cord from being cut with the progress of the machine.

8. No one is allowed to stand behind the saw. Prevent objects from splashing and hurting people.

9. The saw blade shall not be placed or handed over to others when it is not stopped.

10. Do not operate when the shield is not in place, and do not place your hand within 15 cm of the saw blade.

11, before repair or replacement parts must first cut off the power, and wait for the saw blade to stop completely. Be sure to put the shield back in place after repair.

12, found abnormal sound, should immediately stop the inspection. Notify relevant maintenance personnel for inspection or repair to avoid accidents.