Introduction to the precautions for the use of ceramic tile cutting machine edging machine

Note:

1, the tile surface can not be scratched or white spot phenomenon.

2, in cutting a large number of tiles, it is necessary to test the performance of the cutting machine, and the test method is to check the effect of the first piece of tile cut by the cutting machine.

3, before moving the tile to check whether there are cracks in the tile itself, if there are cracks we can be more careful in moving, or directly abandoned, to avoid sudden rupture in the process of moving.

Two points must be noted when using:

① The combination surface of the rear pressure plate and the guide rail should be lubricated frequently, otherwise the normal service life of the machine will be affected by premature wear of the front and back pressure plate and the working surface of the guide rail. Although some models have automatic lubrication devices, it is necessary to regularly check whether the lubrication pipeline is smooth.

When clamping tiles, the clamping force should be appropriate, too loose affects the grinding quality, too tight will increase the machine load, easy to produce shaking crawling phenomenon, and it is easy to crush tiles when grinding thin tiles. The clamping force can be tested by clamping a slightly larger tile on the machine.

That is, the tile is clamped in the middle of the machine, the hands are forced to move the tile under the shutdown state, and the clamping force is adjusted to just when the hands can not move.

The above finishing operation method and use precautions, I hope that everyone must strictly follow the safety procedures when using the tile cutting machine, and pay attention to the precautions mentioned to ensure their personal safety. Tile cutting machine, in our lives is not very common a machine, usually when we go to the tile market will see that there are people in the use of this machine, to make you want the size and size. Edging machines (straight edge machine, round edge machine, bevel edge machine) work by clamping the ceramic tile and driving its linear motion.