Fully automatic ceramic tile cutting machine use detailed instructions and precautions

1, the inspection of the ceramic tile cutting machine before operation should meet the following requirements:

(1) The shell and handle are not cracked or damaged;

(2) The cable cord and plug are intact, the switch works normally, and the protective zero connection is correct and firm and reliable;

(3) Each part of the protective cover is complete and firm, and the electrical protection device is reliable.

2. After the tile cutting machine is started, it should run without load, and it should be checked and confirmed that the linkage of the machine is flexible. When working, the afterforce should be stable and should not be too strong.

(1) The operation should prevent debris, mud and dust mixed into the motor, should be and at any time observe the housing temperature, when the housing temperature is too high and produce brush sparks, should be immediately shut down for inspection and treatment;

(2) The force in the cutting process should be uniform and appropriate, and the force should not be too strong when pushing the blade. When the blade is stuck, it should be stopped immediately, slowly exit the blade, and can be cut again after re-alignment.

3, tile cutting machine is strictly prohibited overload use. During operation, attention should be paid to sound and temperature rise, and any abnormality should be stopped immediately for inspection. When the working time is too long and the temperature rise of the machine exceeds 60 ° C, the machine should be shut down and then operated after natural cooling.

4, the ceramic tile cutting machine in the operation, shall not touch the cutting tool, mold and grinding wheel, found that it is blunt, damaged, should immediately stop dressing or replacement, and then continue the operation.

5, ceramic tile cutting machine rotation, do not give up.