Ceramic tile cutting machine correct operation method

How to repair the tile cutting machine quickly?

1 The failure of the ceramic tile cutting machine in use should be immediately feedback to the manufacturer for maintenance, because the fault diagnosis and rapid solution of various faults can be carried out in professional technicians, and the normal working output can be restored.

2 The ceramic tile cutting machine should avoid moisture and water leakage in the process of use, so as to protect the efficiency of cleaning in the operation of the movement.

3 In the process of daily use, the ceramic tile cutting machine should be checked in advance, and the fault situation should be updated and repaired immediately, so that the water cutting machine can have a higher temperature value in the processing.

4 In the noisy mood of the tile cutting machine, it is necessary to check whether there is oil leakage or water leakage in the pipeline, and to remove the fault in the high pressure oil pump to prevent the phenomenon of abnormal operation in the blockage

5 Ceramic tile cutting machine manufacturers should regularly add lubricating oil to the nuts of the addition device, effectively preventing the phenomenon of paralysis, and also speeding up the efficiency of the work.

Ceramic tile cutting machine correct operation method:

1, simply turn on the tile cutting machine normally, and then let it start naturally for a few minutes.

2, then put the tile on the cutting platform.

3, the tile will be cut in the cutting process, watch the cutting situation, pay attention to the sound of cutting and the effect of processing.

4, do not move the machine in use.

5, the operator needs professional training and skilled operation, non-professionals do not move.

6, ceramic tile cutting machine is a kind of demanding equipment, so the operation of the cutting machine needs to be three (fixed person, fixed machine, fixed post).

7, before the operation need to confirm that there is no external interference, all normal, the cut plate hanging on the cutting platform, the plate can not exceed the cutting range.