Ceramic cutting machine is one of the important tools for ceramic tile processing

Ceramic cutting machine is just a general term for a machine, which can include many different types of equipment, the specific use of nature is different, but the general method of operation are similar. Before operating the tile cutting machine, you must first ensure that the site of the production workshop is clean and tidy, and maintain a proper environment, and do not operate in flammable and explosive places to avoid risks. There have also been attempts to explode due to excessive production site environment and dust, resulting in serious casualties. Therefore, we must not underestimate the impact of dust on safety production. Secondly, workers should not use external forces to deform the machine, affecting its accuracy and safety. Never place cutting materials on the work surface to prevent them from touching the rotating blade. The cable of the machine should be checked regularly and the handling handle should be kept flat.

Ceramic cutting machine can be divided into manual type and automatic type, according to the use of demand, for manual type, mainly can not be mass cutting processing, automatic type for belt rolling, suitable for mass operation, because the current tile cutting machine is CNC operation, just a simple button start, and touch screen numerical input can achieve cutting size, great convenience.

The above are the precautions before cutting the tile cutting machine. When officially starting cutting, there are two main cutting methods. The following hand push cutting machine as an example. First, the straight cut. This requires adjusting the cutting head to straighten the saw blade and table. The saw point of the blade is fixed by locking the handle. The saw blade can be passed through a pair of limiting bolts relative to the upper and lower positions of the table, and then laid on the table tile or other building materials, turn on the switch, and the saw blade rotates. When the pump begins to absorb water, push the table forward so that the blade cuts the tiles on the table as required.

The second mode of operation of the tile cutting machine is chamfering. For this type of cutting, a cutting head that can be rotated is required. Before operation, it is necessary to rotate the machine head 45 degrees, tighten the locking handle, align the blade with the cutting material, and then push the table forward, push to cut at 45 degrees, so that a complete 45 degree Angle of the tile comes out.